- 积分
- 1128
- 在线时间
- 916 小时
- 最后登录
- 2023-8-10
- 阅读权限
- 70
- 精华
- 0
- UID
- 185998
- 帖子
- 1109
- 精华
- 0
- 经验
- 1128 点
- 金钱
- 1090 ¥
- 注册时间
- 2010-3-28
|
本帖最后由 啸竹 于 2019-9-16 13:17 编辑
Dear E1 :
Android APP BUG List:
1,In Xover interface , If I only control LPF and HPF , let the frequency response curve fall out of the screen range, then I will automatically exit the Xover interface and return directly to the interface just entered the APP.
2,If I delete all PEQs and save to generate a new Preset, the Xover interface in this Preset, the PEQ switch is always OFF, click the " PEQ OFF" button does not respond.
3,The Preset selected in the Preset manager will be highlighted, but only the difference between gray and white is not obvious. I hope to change to other more obvious colors, such as bright green, bright blue and so on.
4,I recommend that you can choose to turn HPF and LPF on or off in the Xover interface. Display the current Prest name on the Xover interface
5,According to a private survey of Chinese subwoofer DSP users, we found that users want the lower limit of management of LPF and PEQ of DSP as low as 10Hz (currently iWoofer is 20hz), and Q up to 20 。The users involved in this survey have used Behringer DSP1124, MiniDSP (and HD Ver), ANITMODE2.0, etc.
AND,users want the app to directly apply the EQ file automatically generated by the REW software.,,,,Of course, I also expect Iwoofer to support hardware microphones (support microphone frequency response calibration file and sensitivity calibration) to automatically implement room acoustic processing. Even the paid feature.
6,I hope iWoofer is upgraded to support 1 in 2 out. I am willing to pay $3 for each app that supports 1In2Out, and if the app has room measurement and correction and sound pressure meter and pink noise generator function (users calibrate the microphone sensitivity) , I am willing to pay another $3. A total of 6 dollars
|
|