- 积分
- 70
- 在线时间
- 153 小时
- 最后登录
- 2022-9-28
- 阅读权限
- 50
- 精华
- 0
- UID
- 68241
- 帖子
- 79
- 精华
- 0
- 经验
- 70 点
- 金钱
- 78 ¥
- 注册时间
- 2008-12-11
|
Q1. No sound. Daphile seems to recognize audio device and play music
to it but there is no sound?
A1. In most cases this is related to the "Mixer Controls" settings of
the audio device (Settings -> Audio Devices). User might have to enable
some controls there in order to unmute the sound.
Q2. I have installed Daphile ISO file according to the instructions
but Daphile does not start with it. What can I do?
A2. You can try Rufus or Universal USB Installer instead of
unetbootin. Some users have reported that those two work more
reliably.
Q3. Problems with new version. How can I revert back to previous version?
A3. The old versions are available at
http://www.daphile.com/firmware/stable/old/. The full installation of
Daphile may be "upgraded" to any specific version at
http://daphile/cgi-bin/Devel. Users have to copy the download link of
the version as text to input field besides the Install button and
press Install to process.
Q4. Can I install Daphile on Rasberry Pi?
A4. Daphile is not compatible with any ARM devices.
Q5. Hardware. Is Daphile compatible with ... DAC, wifi adapter,
motherboard or any device?
A5. In general I can't answer these questions. I have also decided
that I will not collect and maintain any hardware compatibility
information. I don't want to take responsibility for possibly
providing wrong information for anyone's purchase decisions.
Q6. The media server crashes.
A6. First you should try to restart with "Reset all Media Server
settings" option and also upgrade Daphile to the latest version. If
that does not help, I can only recommend to "Reset all settings to the
latest firmware defaults" (bottom of the Settings page) or do a fresh
new installation on an empty drive.
Q7. How should I configure Daphile to the music files from my NAS?
A7. I think most ready-made NAS devices should work with CIFS network
drive settings. You can find some help in Installation Instructions:
https://www.daphile.com/download/DaphileInstallation.pdf
Q8. How can I setup a wireless hotspot?
A8. First of all Daphile need compatible WiFi adapter. If such is
recognized by Daphile, then there should be the settings options at
Settings -> Networking, otherwise there aren't any settings for hotspot
mode. Some Wifi Realtek adapters seem to establish the hotspot but
authentication fails always due to a bug in the kernel driver. Some
adapters support concurrent operation both as client and hotspot while
other adapters work only in one mode at the time.
Q9. Does Daphile support SACD ISO files?
A9. No. I recommend to convert them to DSF format for example with
"sacd_extract"-tool. The DST decoding should be removed also during
the conversion. With "sacd_extract" you should use "--output-dsf" and
"--convert-dst" options, and also "--2ch-tracks" because Daphile does
not support multichannel audio. However it might be worth saving the
original SACD ISO file.
Q10. How should I configure the audio settings in order to maximize
the audio quality?
A10. In short: Use bit-perfect playback and have good enough
DAC. Longer version: My own view and experience is that if you
have good enough DAC (using asynchronous data transfer from PC,
independently powered, galvanic isolation between USB receiver
and actual DAC+analog circuitry, etc...) any audio device
parameters don't effect on sound quality as long as you use bit
perfect playback and keep the parameters sensible so that they
don't cause any buffer under-runs (and have also some tolerance
for high system load situations). If the DAC does not meet those
requirements the chances that computer HW+SW combination effect
on sound quality are much higher and the effects may be caused by
many unpredictable reasons (HW, SW, parameters, specific
combinations of them, etc...). You just have to experiment and
try to find the best setup (or buy better DAC ;-).
Q11. What is the default password for wireless hotspot?
A11. secret1234
Q12. Daphile fails to use NTFS disk partition in read-write mode.
A12. The problem is most probably due to the "fast startup" feature of
Windows 8 and 10. Please read more for example from here
https://wiki.archlinux.org/index.php/NTFS-3G
in section "Metadata kept in Windows cache, refused to mount".
Q13. Can I access Daphile with ssh?
A13. Only the beta versions have ssh server and root password enabled.
Root password is "zaq" without quotes. Beta versions are
available here: http://www.daphile.com/firmware/beta/ |
|