- 积分
- 244
- 在线时间
- 929 小时
- 最后登录
- 2023-7-5
- 阅读权限
- 50
- 精华
- 0
- UID
- 834496
- 帖子
- 234
- 精华
- 0
- 经验
- 244 点
- 金钱
- 218 ¥
- 注册时间
- 2017-6-28
|
楼主 |
发表于 2018-8-20 09:19
|
显示全部楼层
I just tested the SPDIF/Toslink board on PCM9211, works fine, and fully auto accepts 16-24bit 44.1-192kHz. SPDIF_TX always sending TAS5558 input data whatever SPDIF_RX/ADC or USB input selected. So it allows using more than one HiFi-TOYs together for bi/tri-amping, i.e. in-serial USB/RX1->AMP1->TX1->RX2->AMP2 etc. Due to PCM9211 has an ADC onboard, not so cool one S/N -101db 24/96, I decided to use it just in case(not sure if someone needs it if already has USB/SPDIF-Toslink). Anytime when SPDIF_RX isn't detected, HiFi-TOY automatically play from analog inputs(both 3.5mm Jacks could be an analog input either SPDIF_RX or SPDIF_TX). I think it is crazy compact design again(39x24mm the same as BT_stream board which could be optionally installed instead of SPDIF board), as the whole HiFi-TOY actually ;)
我刚刚测试了PCM9211上的SPDIF / Toslink板,工作正常,完全自动接受16-24bit 44.1-192kHz。 无论选择何种SPDIF_RX / ADC或USB输入,SPDIF_TX始终发送TAS5558输入数据。 因此,它允许将多个HiFi-TOY一起用于双/放大,即串行USB / RX1-> AMP1-> TX1-> RX2-> AMP2等。由于PCM9211板载ADC,不太酷 一个S / N -101db 24/96,我决定使用它以防万一(不确定是否有人需要它,如果已经有USB / SPDIF-Toslink)。 无论何时未检测到SPDIF_RX,HiFi-TOY都会自动从模拟输入播放(两个3.5mm插孔都可以是模拟输入SPDIF_RX或SPDIF_TX)。 我认为它再次是疯狂的紧凑设计(39x24mm与BT_stream板相同,可以选择安装而不是SPDIF板),因为整个HiFi-TOY实际上 |
|