- 积分
- 485
- 在线时间
- 209 小时
- 最后登录
- 2024-5-6
- 阅读权限
- 50
- 精华
- 0
- UID
- 787724
- 帖子
- 423
- 精华
- 0
- 经验
- 485 点
- 金钱
- 395 ¥
- 注册时间
- 2015-3-20
|
自己做吧,给你一个multisim里5U4的
################## SPICE Model ##################
Model ID: 5U4GB
Model manufacturer: IIT
Model template: x%p %tP1 %tP2 %tK_H1 %m
Model data:
.SUBCKT 5U4GB A1 A2 K
.mergenodes A1 A2 //A1 A2两个脚并成一个,spice中把整流电子管当成二极管,所以有Anode和Cathode
* 5U4GB EWB rectifier model
* The following parameters are not modelled:
* (1) Filament and filament warmup time //灯丝预热没有加入模型
* (2) Reverse voltage breakdown //反压崩溃没有做,可以添加BV参数增加Break Down参数
* (3) Saturation //损耗压降没有做
* (4) Interelectrode capacitance //极间电容没有做
* Please note that this model is provided "as is" and
* no warranty is provided in respect of its suitability
* for any application.
* 5U4GB maximum ratings: //绝对最大值限制
* PIV 1550V //阳压
* Max in 550V RMS //最大RMS电压
* Ia pk 1000mA repetitive (4600mA transient) //峰值电流1A
* .----- Anode
* | .--- Cathode
* | |
*SUBCKT 5U4GB A K
BGP A K i = 7.55E-4*(pwr(V(A,K),1.5)+pwrs(V(A,K),1.5))/2 //模型本型了,不会写是吧,其实这个关键的参数7.55是斜率,是工作曲线的倒数,6z4没给这个曲线,用6x4的吧,7.3
.ENDS 5U4GB
把里面所有的5U4GB字样都换成6Z4,公式用6x4一改,OK了…… |
|