新买的mark Levinson 5802

小邪神

usb不知道怎么用，接上不能播放。比我的翩美前后级旗舰推力大。
图片太大，上传不了

ss0009671

是不是犯了低级错误?
不管要不要驱动,先usb连接,然后再开播放器.
先开播放器的话播放器已经有输出(耳机或线路或hdmi等等),他是不会自动切到usb的.
先连接usb在开播放器,大部分播放器会优先usb输出不需手动切换.

玉米

给你USB的英文操作，你自己找翻译软件吧！
N0 5805 N0 5802
Congratulations on your purchase of a Mark Levinson® integrated amplifier.

Digital inputs (Nº5805): The N05805 has four digital audio input connectors: an asynchronous USB-B (labeled with a USB icon ), two optical (TOSLINK) S/PDIF connections (labeled T1 and T2) and one coaxial (RCA) S/PDIF connections (labeled C1).
Digital inputs (N05802): The N05802 has six digital audio input connectors: An AES/EBU-format XLR connection (labeled AES/EBU), an asynchronous USB-B digital audio connector (labeled with a USB icon ), two optical (TOSLINK) S/PDIF connectors (labeled T1 and T2), and two coaxial (RCA) S/PDIF connectors (labeled C1 and C2).
USB port: This USB Type-A connector allows you to perform firmware upgrades that may be offered in the future, and to import and export setup configurations via a standard USB drive or memory stick (FAT32 formatted). Firmware updates may also be accomplished via download when the unit is connected to a local area network (LAN) via an Ethernet cable. (See page 24 for more detailed firmware update instructions.)

The following setting is available only for the asynchronous USB input: DSD Filter: 以下设置是只提供异步的USB输入:

This setting lets you set the low-pass filter characteristic for DSD high-resolution digital content. You can select from roll-offs that begin at 47kHz, 50kHz, 60kHz or 70kHz. The audible effects of the different roll-off characteristics are subtle and will vary depending on the type of musical content and the high-frequency bandwidth of your speakers and headphones. Feel free to experiment to find the DSD filter setting that sounds best to you。

Config: This menu group allows you to lock, restore, import, or export Setup configuration settings.
配置:该菜单组允许您锁,恢复,进口或出口设置配置设置。
Config Export: Press Enter to export all setup configuration information to a thumb drive inserted in the rear panel USB port. This data can then be used to configure other N05805 / N05802 units or serve as a backup so you can quickly reconfigure your unit. Once you have your unit’s configuration precisely as you would like it, we strongly recommend you save a Config Export file to a thumb drive in case an untoward event erases your configuration settings.
Config Import: Press Enter to import all setup configuration information from a thumb drive inserted in the rear-panel USB port.