- 积分
- 2346
- 在线时间
- 4247 小时
- 最后登录
- 2024-4-24
- 阅读权限
- 100
- 精华
- 0
- UID
- 761332
- 帖子
- 2389
- 精华
- 0
- 经验
- 2346 点
- 金钱
- 2301 ¥
- 注册时间
- 2014-10-10
|
这是国外网站上一个DVD-500用户的说法:
Hi , I have 2 of the old DVD5000 units, they were renowned for optical pickup failures, i still have a brand new spare optical block.
One thing you can try though.......will it still read cd,s but not DVD,s??
If so, the tracking of the optical block might be out of alignment....one of my units failed to read DVD,s, one of the service tech,s was kind enough to provide me with a service manual . You can initiate a tracking adjustment via a service menu, you can then adjust the pickup tracking via a small hex key located under the bottom of the unit through the base plate...
Its been a few years since i did this , but if your interested i can dig out the old service menu and find the directions for you....youve got nothing to loose..
If it will not read CD,s and DVD,s ( NO DISC ) error then it is most likely the laser unit...i actually had one of my other units repaired twice..
As for video quality....The DVD5000 as expensive as it was ( AUD$5000) does not approach even some of the cheapie players that are available now.... |
|