[心得经验] DIY  CDM4  CD机(参赛)

[复制链接] 查看: 19744|回复: 38

42

主题

0

好友

597

积分

职业侠客 当前离线

Rank: 5Rank: 5

UID
3528
帖子
610
精华
1
经验
597 点
金钱
61 ¥
注册时间
2005-3-19
发表于 2005-11-25 19:08 | 显示全部楼层
一、自白
    早在两年前就有将PHILIP CDM4的驱动的主板301改制作成有数字输出的cd机的想法了,以前用洞洞板在7310后加了saa7220接数字输出,因效果不理想就扼置下来,直到今年头从别人手中转让了一套沙冰的伺服板后又有了这种冲动,原板子上有bug,拿到手后,借着以前对301板的分析研究和改装,它的电路有小小了解,很快就把板中的bug修改过来了,使其能正常工作,因工作关系本人这一年多来长期出差在外,所以机芯和板子一直是裸体放着,直到上个月得到小明赠送的1541板及一对1541R1和1700提供的不锈钢按键后,才有给M4穿上衣服的决心。
二、制作
   (1)、机箱改制:为了加工方便,买了一个纯后级机箱对其面板和后板进行改装,采用中置式出仓,按键用1700提供的不锈钢按键。<img src="attachments/dvbbs/2005-11/200511261679238.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/200511261679238.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />图3、<img src="attachments/dvbbs/2005-11/2005112616749204.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/2005112616749204.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />图4、<img src="attachments/dvbbs/2005-11/2005112616757113.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/2005112616757113.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />图5
(2)伺服板改制:
原沙冰板上没有整流和稳压电源部分,需外接稳压电源,原作者在设计板时已溶入了各IC分开供电的思维,改制比较方便,于是一不做两不休,又对PCB板动了小手术,使各IC分别供电,自已做了几组稳压电源接入,让其工作更稳定、相互间干扰更小,对比采用原来板上的供电模式,无论声场、细节、高低频延伸各方面都有明显提高,背景也更加宁静;同时也把原板上的数字输出部分和晶振部分也废了,接上在坛上购买的数字输出板和时钟板,这两件DD的素质和效果早有定论,在此不再多言了。
<img src="attachments/dvbbs/2005-11/20051126235913428.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/20051126235913428.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />
图6
<img src="attachments/dvbbs/2005-11/20051126235924899.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/20051126235924899.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />
图7<img src="attachments/dvbbs/2005-11/2005112623593376.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/2005112623593376.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />
<img src="attachments/dvbbs/2005-11/200511270534354.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/200511270534354.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />图16<img src="attachments/dvbbs/2005-11/20051127054595.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/20051127054595.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />图17<img src="attachments/dvbbs/2005-11/200511270612487.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/200511270612487.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />图18

(3)新做的显示、控制板:
配套的显示、控制板因尺寸不适合机箱面板,于是自已动手用洞洞板焊了一块显示、控制板,唉,那廉价的粪纸板,焊完后板有点弯曲,各控制键不在同一水平面,又要对板和有些按键进行垫平才能使轻触开关按得自如。
<img src="attachments/dvbbs/2005-11/20051126235942909.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/20051126235942909.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />
<img src="attachments/dvbbs/2005-11/20051126235952783.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/20051126235952783.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />
(4)解码板:
机内解码用明9002的1541板,原来的板是一声道用一块PCB板,一块板用两块1541并联作一声道输出,该板素质不错,只是电源设计有点简单,以后有时间对板上的供电部分加强可能会更好。我只用一块PCB板,把它改成作两声道输出,直接在7220后取信号接入1541,让它们老爷级的IC相互配合,天作之配。
<img src="attachments/dvbbs/2005-11/20051127021108.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/20051127021108.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />图11<img src="attachments/dvbbs/2005-11/200511270215548.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/200511270215548.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />
全机用两只环牛,M4部分用一只,1541解码部分用一只。在安装时发现机芯的平衡、防振无伦采用什么安装方式都非常重要。
<img src="attachments/dvbbs/2005-11/200511270222548.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/200511270222548.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />图13<img src="attachments/dvbbs/2005-11/200511270230629.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/200511270230629.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />图14<img src="attachments/dvbbs/2005-11/20051127045817.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-11/20051127045817.jpg\');}" onmousewheel="return imgzoom(this);" alt="" />图15

三、后言
装机完毕后,用表测1541输出竞有几伏直流电压,征求小明意见后加了输出电容,接好线后,用机内1541解码输出到天龙AV功放和荷兰产DRIADE牌落地音箱(采用ETON喇叭单元)试听,效果不错.声音表现平衡顺滑,深度和延伸度都较好,以后等机子稳定了再对它进行调校,应该还会更好表现,到时再外接解码器和找几台机子回来详细比较。。。。。。












DIY M4 CD机(是否能参赛?)

DIY M4 CD机(是否能参赛?)

DIY M4 CD机(是否能参赛?)

DIY M4 CD机(是否能参赛?)

42

主题

0

好友

597

积分

职业侠客 当前离线

Rank: 5Rank: 5

UID
3528
帖子
610
精华
1
经验
597 点
金钱
61 ¥
注册时间
2005-3-19
 楼主| 发表于 2005-11-27 20:30 | 显示全部楼层

12月出,嘿嘿正好!到时看看怎样.

以下是引用明9002在2005-11-27 18:17:00的发言:
12月出吧……



247

主题

20

好友

6543

积分

贵宾 当前离线

Rank: 3Rank: 3

UID
1973
帖子
6679
精华
5
经验
6543 点
金钱
4807 ¥
注册时间
2004-10-29

元老级 论坛贵宾

发表于 2005-11-27 18:17 | 显示全部楼层

我下个解码器?

12月出吧……

42

主题

0

好友

597

积分

职业侠客 当前离线

Rank: 5Rank: 5

UID
3528
帖子
610
精华
1
经验
597 点
金钱
61 ¥
注册时间
2005-3-19
 楼主| 发表于 2005-11-27 16:40 | 显示全部楼层

原配的控制板你切开后,可用线连回来,不难啊,

以下是引用1700在2005-11-27 16:36:00的发言:
出入仓还没搞!!显示仓还没找到深色的玻璃罩!!!




显示仓深色的玻璃罩去找个VCD机尸体拆来改。

104

主题

0

好友

2026

积分

罗宾汉 当前离线

Rank: 7Rank: 7Rank: 7

UID
1165
帖子
1162
精华
0
经验
2026 点
金钱
419 ¥
注册时间
2004-8-7
发表于 2005-11-27 16:36 | 显示全部楼层

我的已经在听着!!就是控制板没改好!!

出入仓还没搞!!显示仓还没找到深色的玻璃罩!!!



42

主题

0

好友

597

积分

职业侠客 当前离线

Rank: 5Rank: 5

UID
3528
帖子
610
精华
1
经验
597 点
金钱
61 ¥
注册时间
2005-3-19
 楼主| 发表于 2005-11-27 16:11 | 显示全部楼层

你的也赶快吧,

以下是引用1700在2005-11-27 15:27:00的发言:
我的现在还没完全搞好!!加上我机内得DD很乱!!!主要是加入了小龙的1798<I></I> DAC<I></I> 变得很紧凑!!

机子实物比相片好看得多,相片照得太烂了。该机的每步都用心去做的,从面板设计到那部分用什么元件我都经过考虑和比较过才决定使用的,等机子稳定后可能还要调较。



104

主题

0

好友

2026

积分

罗宾汉 当前离线

Rank: 7Rank: 7Rank: 7

UID
1165
帖子
1162
精华
0
经验
2026 点
金钱
419 ¥
注册时间
2004-8-7
发表于 2005-11-27 15:27 | 显示全部楼层

wy5829 做得比我强很多 !!!!

我的现在还没完全搞好!!加上我机内得DD很乱!!!主要是加入了小龙的1798 DAC 变得很紧凑!!

18

主题

0

好友

498

积分
     

业余侠客 当前离线

Rank: 4

UID
4665
帖子
429
精华
0
经验
498 点
金钱
222 ¥
注册时间
2005-6-20
发表于 2005-11-27 15:18 | 显示全部楼层

厉害!流口水.......

2553

主题

1

好友

1万

积分
     

管理员 当前离线

Rank: 9Rank: 9Rank: 9

UID
3
帖子
11083
精华
11
经验
14135 点
金钱
3151 ¥
注册时间
2004-3-16
发表于 2005-11-27 13:57 | 显示全部楼层

做得非常好!

42

主题

0

好友

597

积分

职业侠客 当前离线

Rank: 5Rank: 5

UID
3528
帖子
610
精华
1
经验
597 点
金钱
61 ¥
注册时间
2005-3-19
 楼主| 发表于 2005-11-27 12:15 | 显示全部楼层

小明,真的要多谢你!不是客气的.是给了我动力.

以下是引用明9002在2005-11-27 1:25:00的发言:
wy5829兄帮我这么多我都还不知道如何感谢捏~~~
你真牛B<I></I> ……<I></I> 真的很牛B……其实我自己做的板子我很懒<I></I> 到现在还没给它上电<I></I> 使用捏……555555你比我还快


还等你下一个解码来试呢.呵呵.....

247

主题

20

好友

6543

积分

贵宾 当前离线

Rank: 3Rank: 3

UID
1973
帖子
6679
精华
5
经验
6543 点
金钱
4807 ¥
注册时间
2004-10-29

元老级 论坛贵宾

发表于 2005-11-27 01:47 | 显示全部楼层

口水不如自己做一台玩嘿嘿

以下是引用田雨在2005-11-27 1:35:00的发言:
流口水,佩服!

25

主题

0

好友

619

积分

职业侠客 当前离线

Rank: 5Rank: 5

UID
5387
帖子
476
精华
1
经验
619 点
金钱
67 ¥
注册时间
2005-8-29
发表于 2005-11-27 01:35 | 显示全部楼层

好东西

流口水,佩服!

247

主题

20

好友

6543

积分

贵宾 当前离线

Rank: 3Rank: 3

UID
1973
帖子
6679
精华
5
经验
6543 点
金钱
4807 ¥
注册时间
2004-10-29

元老级 论坛贵宾

发表于 2005-11-27 01:29 | 显示全部楼层

你的手工真不错

强烈支持你参赛……不顶不得啊~~

247

主题

20

好友

6543

积分

贵宾 当前离线

Rank: 3Rank: 3

UID
1973
帖子
6679
精华
5
经验
6543 点
金钱
4807 ¥
注册时间
2004-10-29

元老级 论坛贵宾

发表于 2005-11-27 01:25 | 显示全部楼层

客气个啥?

wy5829兄帮我这么多我都还不知道如何感谢捏~~~
你真牛B …… 真的很牛B……其实我自己做的板子我很懒 到现在还没给它上电 使用捏……555555你比我还快

127

主题

1

好友

3576

积分
     

贵宾 当前离线

K哩啡

Rank: 3Rank: 3

UID
44
帖子
2426
精华
5
经验
3576 点
金钱
791 ¥
注册时间
2004-3-23

元老级

发表于 2005-11-27 00:02 | 显示全部楼层

顶一个!

42

主题

0

好友

597

积分

职业侠客 当前离线

Rank: 5Rank: 5

UID
3528
帖子
610
精华
1
经验
597 点
金钱
61 ¥
注册时间
2005-3-19
 楼主| 发表于 2005-11-26 23:11 | 显示全部楼层

小明,多谢你的板和IC

以下是引用明9002在2005-11-26 21:25:00的发言:
汗……哈哈
[em11]
B

31

主题

0

好友

767

积分

职业侠客 当前离线

Rank: 5Rank: 5

UID
4309
帖子
599
精华
0
经验
767 点
金钱
49 ¥
注册时间
2005-5-20
发表于 2005-11-26 22:05 | 显示全部楼层

真 是 牛人啊!



[em05][em05][em05][em05][em05]

247

主题

20

好友

6543

积分

贵宾 当前离线

Rank: 3Rank: 3

UID
1973
帖子
6679
精华
5
经验
6543 点
金钱
4807 ¥
注册时间
2004-10-29

元老级 论坛贵宾

发表于 2005-11-26 21:25 | 显示全部楼层

一不小心……你还真把板子给装上了

汗……哈哈

42

主题

0

好友

597

积分

职业侠客 当前离线

Rank: 5Rank: 5

UID
3528
帖子
610
精华
1
经验
597 点
金钱
61 ¥
注册时间
2005-3-19
 楼主| 发表于 2005-11-26 16:32 | 显示全部楼层

是用纯后级成品箱改制的,

以下是引用laurel在2005-11-26 12:06:00的发言:
机箱是改装的吗?


坛子一次才可上5张图。。

36

主题

0

好友

444

积分

业余侠客 当前离线

Rank: 4

UID
4226
帖子
211
精华
0
经验
444 点
金钱
12 ¥
注册时间
2005-5-12
发表于 2005-11-26 16:28 | 显示全部楼层

有CDM4PRO机芯的话,我或许会试一试!

楼主牛人哪!
您需要登录后才可以回帖 登录 | 注册

本版积分规则

Powered by Discuz! X3.4

© 2001-2012 Comsenz Inc.

返回顶部