txy4327 发表于 2012-8-12 09:14

coda7se 高音喇叭坏了，收一个跟换！

coda7se 高音喇叭坏了，收一个跟换！希望有的闲置的朋友能出给我！

txy4327 发表于 2012-8-12 09:14

自己顶下！希望可以收到！

hmzhh 发表于 2015-11-23 16:33

本帖最后由 hmzhh 于 2015-11-23 16:36 编辑

我有一对CODA8的高音，应该是一样的，你查查KEF的网站。你想想有什么可换给我的？有意PM。
coda8购自云南某网友，他原来烧了低音修好，到我手里不小心箱体摔坏扔掉了，分频和低音已经利用，高音我拆开磁铁和振膜分别放置着，其中一个丝膜已经很薄，若谈成就一对都给你。要不你把CODA7转给我也行呀。

hmzhh 发表于 2015-11-23 16:36

Specification: Coda 7
System type: Two-way, bookshelf/stand-mount
Enclosure type: Reflex
Dimensions: (H x W x D): 300 x 180 x 235mm (11.8 x 7.1 x 9.3 inches)
Weight: 3.3kg (7.3 lbs)
Nominal impedance: 6 ohms
Amplifier requirements: 10-70W
Maximum Output: 109dB
Frequency response: 48Hz to 20kHz +/-3.0dB (-6dB at 42Hz)
Sensitivity: 91dB at 1m for 2.83V
Finish: Black Ash or Mahogany
System: SP3192
Drive units: B130 bass/midrange unit (SP1355), 25mm tweeter (SP1354)
Crossover network: SP2228

Specification: Coda 8
System type: Two-way, bookshelf/stand-mount
Enclosure type: Reflex
Dimensions: (H x W x D): 325 x 200 x 288mm (12.8 x 7.9 x 11.3 inches)
Weight: 4.6kg (10.1 lbs)
Nominal impedance: 6 ohms
Amplifier requirements: 10-100W
Maximum Output: 110dB
Frequency response: 45Hz to 20kHz +/-3.0dB (-6dB at 39Hz)
Sensitivity: 91dB at 1m for 2.83V
Finish: Black Ash or mahogany
System: SP3194
Drive units: B160 bass/midrange unit (SP1372), 25mm tweeter (SP1354)
Crossover network: SP2240

hmzhh 发表于 2015-11-23 16:37

coda7和coda8的高音型号都是SP1354
页: [1]
查看完整版本: coda7se 高音喇叭坏了，收一个跟换！