论坛 › 电路图及DIY资料专区 › 贴图 (GM Mimesis 3)

swing 发表于 2010-12-9 01:46

贴图 (GM Mimesis 3)

按惯例，转贴标明出处，是一种美德~ Goldmund Mimesis 3 Clone, World's Best Amplifier!!!!
其余不多说，仅供学习……

哦，还有，仅转贴GM的原厂电路，原贴作者设计的PCB请到上面链接去找，如果觉得我转贴不妥，请原贴作者看到帖子后跟我联系，用中文，谢谢！:)


红色部分是作者自己添加的。


电源


保护

swing 发表于 2010-12-9 01:49

Goldmund Mimesis 3 Clone抯 Part List (for a stereo amplifier)

- PCB, FR-4, 2 Layer, 1 oz. cu., Lead Free Finish, 9.4?X 5.0?(X2)
- Kester Eutectic Rosin Core Solder, 63/37, 21 AWG, 1lb.
- 18 AWG, Silver Plated, Teflon Insulated Wire (input wiring)
- 16 AWG, Silver Plated, Teflon Insulated Wire (AC power supply wiring)
- 12 AWG, Silver Plated, Teflon Insulated Wire (speaker output, rail wring)
- L1 (Output Series Inductor, 22 Turn, Moulded) = 18 AWG (1.0mm) Magnet Wire
- Conrad Heatsinks, Flanged, MF30-1F-75, Black/Clear Anodized, or Plain, www.conradheatsinks.com (X2)
- Vishay Bridge Rectifier, 35A (or 25A-35A), 1200V (or 400V-1200V), GBPS-A (X2)
- Plitron Toroidal Transformer, 2 X 40VAC, 300VA, 077035201, www.plitron.com (X2)
- Vampire Binding Posts, BP-HEX, www.vampirewire.com (2 pairs)
- Vampire Binding Posts, BP-3, www.vampirewire.com (2 pairs), (alternate)
- Vampire RCA Female, CM2F-OFC, www.vampirewire.com (X2)
- Connex RCA Female, 68140, www.partsconnexion.com, (X2), (alternate)
- Schurter IEC, Fused, 10A, 250V, 6200.2100
- Mains Fuse, 3A (For 110V), 5A (For 220V), 5 X 20mm, Slow-Blow
- Rail Fuse, 6.3A, 5 X 20mm, Fast-Blow (X4)
- Littlefuse Fuse Clip, Silver Plated, 01000054N, 5 X 20mm (X8)
- Littlefuse Fuse Clip, Tin Plated, 01000056N, 5 X 20mm, (X8), (alternate)
- Chassis Ground Lug, www.mcmaster.com
- Aluminum PCB Support Posts, Threaded, #6-32, 1.25擧, www.mcmaster.com (X4)
- Thermal Grease, 2g
- Mica TO3 Thermal Isolators (X16)
- Rubber Foot, 1/2擠 X 15/64擧, Self Adhesive, www.mcmaster.com, # 95495K481 (X4)
- R8 = Vishay Spectrol Offset Adjust Potentiometer/Trimmer, 064Y201 (X2)
- R8 = Bourns Offset Adjust Potentiometer/Trimmer, 3299W-1-201LF, (X2), (alternate)
- Panasonic Output Relay, 30A, JTN1AS- PA-F-DC24V (X2)
- Omron Output Relay, 16A/8A/8A, G2RL-14-E-CF-DC24V, G2RL-24-CF-DC24V, G2RL-2-CF-DC24V, (X2), (alternate)
- EAO Push Button Round Switch Actuator, Non-Illuminated, Maintained, 704.042.0
- EAO Push Button Round Switch Actuator, Illuminated, Maintained, Green Lens, 704.062.5, (alternate)
- EAO Switching Element, Snap Action, 2, 10A, 704.900.3

Diodes

- D1 = Vishay 6V Zener (X2)
- D2 = Vishay 12V Zener (X2)
- D3 = Vishay 1N4148 (X2)
- D4 = Vishay 1N4148 (X2)
- D5 = Vishay 12V Zener (X2)
- D6 = Vishay 1N4004 (X2)
- D7 = Vishay 1N4004 (X2)
- D8 = Vishay 1N4004 (X2)
- D9 = Vishay 1N4004 (X2)

Diodes in Protection Circuit

- Vishay 1N4002 (X4)
- Vishay 1N4148 (X8)

Transistors

T1 = Vishay-Siliconix/Motorola 2N5565, TO-71, Matched N-Channel JFET Pair (X2)
T1 = Vishay-Siliconix/Motorola 2N5564, TO-71, Matched N-Channel JFET Pair, (X2), (alternate)
T2 = BC546B, NPN, TO-92 (X2)
T2 = BC449A, NPN, TO-92, (X2), (alternate)
T3 = BC546B, NPN, TO-92 (X2)
T3 = BC449A, NPN, TO-92, (X2), (alternate)
T4 = BC182B, NPN, TO-92 (X2)
T5 = BC182B, NPN, TO-92 (X2)
T6 = MPSA92 (MPSA93 original), PNP, TO-92 (X2)
T6 = MPSA93, PNP, TO-92, (X2), (alternate)
T7 = MPSA42 (MPSA43 original), NPN, TO-92 (X2)
T7 = MPSA43, NPN, TO-92, (X2), (alternate)
T8 = MPSA92 (MPSA93 original), PNP, TO-92 (X2)
T8 = MPSA93, PNP, TO-92, (X2), (alternate)
T9 = MPSA42 (MPSA43 original), NPN, TO-92 (X2)
T9 = MPSA43, NPN, TO-92, (X2), (alternate)
T10 = MPSA42 (MPSA43 original), NPN, TO-92 (X2)
T10 = MPSA43, NPN, TO-92, (X2), (alternate)
T11 = MPSA92 (MPSA93 original), PNP, TO-92 (X2)
T11 = MPSA93, PNP, TO-92, (X2), (alternate)
T12 = BD249C, NPN, TO-247 (X2)
T13 = BD250C, PNP, TO-247 (X2)
T14 = Magnatec BUZ900 (Hitachi 2SK134 original), N-Channel Power MOSFET, TO3, 160V (X2)
T15 = Magnatec BUZ900 (Hitachi 2SK134 original), N-Channel Power MOSFET, TO3, 160V (X2)
T16 = Magnatec BUZ905 (Hitachi 2SJ49 original), P-Channel Power MOSFET, TO3, 160V (X2)
T17 = Magnatec BUZ905 (Hitachi 2SJ49 original), P-Channel Power MOSFET, TO3, 160V (X2)

Alternate Power MOSFETS

Hitachi 2SK135/2SJ50
Hitachi 2SK134/2SJ49
Hitachi 2SK133/2SJ48
Hitachi 2SK176/2SJ56
Hitachi 2SK175/2SJ55
Exicon ECF10N16/ECF10P16
Exicon ECF10N20/ECF10P20
Magnatec BUZ901/BUZ906
Magnatec BUZ902/BUZ907
Magnatec BUZ903/BUZ908
Alfet ALF08N16K/ALF08P16K
Alfet ALF08N20K/ALF08P20K

Transistors in Protection Circuit

- MPSA92 (MPSA93 original), PNP, TO-92 (X4)
- MPSA93, PNP, TO-92, (X4), (alternate to MPSA92)
- MPSA42 (MPSA43 original), NPN, TO-92 (X2)
- MPSA43, NPN, TO-92, (X2), (alternate to MPSA42)
- BC449, NPN, TO-92 (X4)
- BC556B, PNP, TO-92 (X2)

Capacitors

- C1 = Kemet 100pF (100V-200V), C0G/NP0, Ceramic (X2)
- C1 = Kemet 150pF (100V-200V), C0G/NP0, Ceramic, (X2), (alternate)
- C1 = 120pF (100V-200V), C0G/NP0, Ceramic, (X2), (alternate)
- C2 = 4.7pF (100V-200V), C0G/NP0, Ceramic (X2)
- C2 = Kemet, 10pF (100V-200V), C0G/NP0, Ceramic, (X2), (alternate)
- C3 = 8.2pF (100V-200V), C0G/NP0, Ceramic (X2)
- C4 = 8.2pF (100V-200V), C0G/NP0, Ceramic (X2)
- C5 = Panasonic FC Series 150uF/100V (150uF/63V original), Electrolytic (X2)
- C6 = Panasonic FC Series 150uF/100V (150uF/63V original), Electrolytic (X2)
- C7 = Panasonic FC Series 470uF/100V (470uF/63V original), Electrolytic (X2)
- C8 = Panasonic FC Series 470uF/100V (470uF/63V original), Electrolytic (X2)
- C9 = Panasonic FC Series 470uF/100V (470uF/63V original), Electrolytic (X2)
- C10 = Panasonic EE Series 220uF/160V, Electrolytic (X2)
- C11 = Panasonic FC Series 470uF/100V (470uF/63V original), Electrolytic (X2)
- C12 = Epcos 1.0uF/100V, Polyester Film (X2)
- C12 = Vishay/Roederstein MKT1822 Series, 1.0uF/100V, Polyester Film, (X2), (alternate)
- C13 = Panasonic FC Series 47uF/100V (47uF/63V original), Electrolytic (X2)
- C14 = Cornell Dubilier 380LX Series, 10,000uF/63V (15,000uF/63V original), Snap-In, Electrolytic (X2)
- C14 = Cornell Dubilier SLP Series, 10,000uF/63V (15,000uF/63V original), Snap-In, Electrolytic, (X2), (alternate)
- C14 = Cornell Dubilier SLPX Series, 10,000uF/63V (15,000uF/63V original), Snap-In, Electrolytic, (X2), (alternate)
- C14 = Panasonic TS-UP Series, 6800uF/80V (15,000uF/63V original), Snap-In, Electrolytic, (X2), (alternate)
- C14 = Panasonic TS-HA Series, 6800uF/63V (15,000uF/63V original), Snap-In, Electrolytic, (X2), (alternate)
- C15 = Epcos 15nF/250V, Polyester Film (X2)
- C16 = Epcos 1.0uF/100V, Polyester Film (X2)
- C16 = Vishay/Roederstein MKT1822 Series, 1.0uF/100V, Polyester Film, (X2), (alternate)
- C17 = Panasonic FC Series 47uF/100V (47uF/63V original), Electrolytic (X2)
- C18 = Cornell Dubilier 380LX Series, 10,000uF/63V (15,000uF/63V original), Snap-In, Electrolytic (X2)
- C18 = Cornell Dubilier SLP Series, 10,000uF/63V (15,000uF/63V original), Snap-In, Electrolytic, (X2), (alternate)
- C18 = Cornell Dubilier SLPX Series, 10,000uF/63V (15,000uF/63V original), Snap-In, Electrolytic, (X2), (alternate)
- C18 = Panasonic TS-UP Series, 6800uF/80V (15,000uF/63V original), Snap-In, Electrolytic, (X2), (alternate)
- C18 = Panasonic TS-HA Series, 6800uF/63V (15,000uF/63V original), Snap-In, Electrolytic, (X2), (alternate)
- C19 = Panasonic FC Series 470uF/100V (470uF/63V original), Electrolytic (X2)
- C20 = Panasonic EE Series 220uF/160V, Electrolytic (X2)
- C21 = Panasonic FC Series 470uF/100V (470uF/63V original), Electrolytic (X2)

Capacitors in Protection Circuit

- Panasonic FC Series, 22uF/100V, Electrolytic (X2)
- Panasonic EE Series, 22uF/160V, Electrolytic (X2)
- Panasonic FC Series, 4.7uF/100V (4.7uF/63V original), Electrolytic (X2)
- Panasonic FC Series, 1.0uF/100V (1.0uF/63V original), Electrolytic (X2)
- Panasonic FC Series, 220uF/63V (220uF/10V original), Electrolytic (X4)
- C1 = Kemet 330pF (100V-200V), C0G/NP0, Ceramic (X2)

Resistors

- R1 = Vishay/Dale CMF Series, 1.5K, 0.25W, 1%, Metal Film (X2)
- R1 = Vishay/Dale CMF Series, 1.2K, 0.25W, 1%, Metal Film, (X2), (alternate)
- R1 = Vishay/Dale CMF Series, 1.0K, 0.25W, 1%, Metal Film, (X2), (alternate)
- R2 = Vishay/Dale CMF Series, 100K, 0.25W, 1%, Metal Film (X2)
- R2 = Vishay/Dale CMF Series, 51K, 0.25W, 1%, Metal Film, (X2), (alternate)
- R2 = Vishay/Dale CMF Series, 20K, 0.25W, 1%, Metal Film, (X2), (alternate)
- R3 = Vishay/Dale CMF Series, 75R, 0.25W, 1%, Metal Film (X2)
- R4 = Vishay/Dale CMF Series, 75R, 0.25W, 1%, Metal Film (X2)
- R5 = Vishay/Dale CMF Series, 33K, 0.25W, 1%, Metal Film (X2)
- R6 = Vishay/Dale CMF Series, 51K, 0.25W, 1%, Metal Film (X2)
- R7 = Vishay/Dale CMF Series, 3K, 0.25W, 1%, Metal Film (X2)
- R9 = Vishay/Dale CMF Series, 3K, 0.25W, 1%, Metal Film (X2)
- R10 = Vishay/Dale CMF Series, 20K, 0.25W, 1%, Metal Film (X2)
- R11 = Vishay/Dale CMF Series, 3K, 0.25W, 1%, Metal Film (X2)
- R12 = Vishay/Dale CMF Series, 33K, 0.25W, 1%, Metal Film (X2)
- R13 = Vishay/Dale CMF Series, 330R, 0.25W, 1%, Metal Film (X2)
- R14 = Vishay/Dale CMF Series, 75R, 0.25W, 1%, Metal Film (X2)
- R15 = Vishay/Dale CMF Series, 10K, 0.50W, 1%, Metal Film (X2)
- R16 = Vishay/Dale CMF Series, 330R, 0.25W, 1%, Metal Film (X2)
- R17 = Vishay/Dale CMF Series, 150R, 0.25W, 1%, Metal Film (X2)
- R18 = Vishay/Dale CMF Series, 75R, 0.25W, 1%, Metal Film (X2)
- R19 = Vishay/Dale CMF Series, 330R, 0.25W, 1%, Metal Film (X2)
- R20 = Vishay/Dale CMF Series, 10K, 0.25W, 1%, Metal Film (X2)
- R21 = Vishay/Dale CMF Series, 330R, 0.25W, 1%, Metal Film (X2)
- R22 = Vishay/Dale CMF Series, 330R, 0.25W, 1%, Metal Film (X2)
- R23 = Vishay/Dale CMF Series, 100R, 0.25W, 1%, Metal Film (X2)
- R24 = Vishay/Dale CMF Series, 100R, 0.25W, 1%, Metal Film (X2)
- R25 = Vishay/Dale CMF Series, 100R, 0.25W, 1%, Metal Film (X2)
- R26 = Vishay/Dale CMF Series, 100R, 0.25W, 1%, Metal Film (X2)
- R27 = Vishay/Dale CMF Series, 10K, 0.25W, 1%, Metal Film (X2)
- R28 = Panasonic-ECG ERG Series, 560R, 1W, 5%, Metal Oxide (X2)
- R29 = Mills MRA-5 Series, 1.8K, 5W (4W original), 1%, Wirewound, Non-Inductive (X2)
- R30 = Mills MRA-5 Series, 0.22R, 5W (3W original), 1%, Wirewound, Non-Inductive (X2)
- R31 = Panasonic-ECG ERG Series, 10R, 3W (2W-4W original), 5%, Metal Oxide (X2)
- R32 = Vishay/Dale CMF Series, 10K, 0.25W, 1%, Metal Film (X2)
- R33 = Panasonic-ECG ERG Series, 560R, 1W, 5%, Metal Oxide (X2)
- R34 = Mills MRA-5 Series, 1.8K, 5W (4W original), 1%, Wirewound, Non-Inductive (X2)

Resistors in Protection Circuit

- Panasonic-ECG ERG Series, 1.5K, 2W, 5%, Metal Oxide (X2)
- Panasonic-ECG ERG Series, 3.3K, 2W, 5%, Metal Oxide (X2)
- Vishay/Dale CMF Series, 1.0K, 0.25W, 1%, Metal Film (X2)
- Vishay/Dale CMF Series, 100K, 0.25W, 1%, Metal Film (X8)
- Mills MRA-5 Series, 1.5K, 5W (4W original), 1%, Wirewound, Non-Inductive (X2)
- Vishay/Dale CMF Series, 470K, 0.25W, 1%, Metal Film (X2)
- Vishay/Dale CMF Series, 100R, 0.25W, 1%, Metal Film (X6)
- Vishay/Dale CMF Series, 10K, 0.25W, 1%, Metal Film (X4)
- Vishay/Dale CMF Series, 15K, 0.25W, 1%, Metal Film (X2)
- Vishay/Dale CMF Series, 53.6K, 0.25W, 1%, Metal Film (X2)
- Vishay/Dale CMF Series, 4.7K, 0.25W, 1%, Metal Film (X4)
- Vishay/Dale CMF Series, 18K, 0.25W, 1%, Metal Film (X6)
- Vishay/Dale CMF Series, 20K, 0.25W, 1%, Metal Film (X2)
- Vishay/Dale CMF Series, 51K, 0.25W, 1%, Metal Film (X2)

swing 发表于 2010-12-9 02:03

贴出来后才发现，第一个电路图D2~D5画反了，这么明显的错误:L

加贴一张，不知道什么型号……

卖油翁 发表于 2010-12-9 09:22

很好，应该接近原装了，只是电压级的电源部分不够理解。

swing 发表于 2010-12-9 10:14

4# 卖油翁

电压级用半波整流+电子滤波……作者声称是原机电路哦~

waocj 发表于 2010-12-9 11:44

電源ac40v是用電容交連至電壓放大級，是為了隔離電流級的干擾？

swing 发表于 2010-12-9 11:48

6# waocj

留意D7/D9，那两颗电容是滤波用的。

waocj 发表于 2010-12-9 13:28

好似半波倍壓電路

啊强DIY 发表于 2010-12-10 16:30

这贴怎么那么少人顶?我来顶一个

hh556677 发表于 2010-12-10 21:41

好电路，学习了。

hh556677 发表于 2010-12-10 21:44

电源电路很有特色，简洁实用。

swing 发表于 2010-12-10 23:45

好似半波倍壓電路
waocj 发表于 2010-12-9 13:28 http://bbs.hifidiy.net/images/common/back.gif

确实是倍压……:L

jxldz 发表于 2010-12-14 05:40

参观下，有高手想做

kennytsang 发表于 2010-12-17 11:23

學習學習

输入电龙 发表于 2011-1-15 07:48

收了

suyean 发表于 2011-2-4 15:13

我也想高高电压！又要搜集资料了

zzyclf 发表于 2011-8-8 17:43

这么好的贴，怎么那么少人顶?我来顶一个！！！！！

zzyclf 发表于 2011-8-8 17:43

这么好的贴，怎么那么少人顶?我来顶一个！！！！！

fascination 发表于 2014-8-22 23:47

我来顶一个！！！！！

查看完整版本: 贴图 (GM Mimesis 3)